Poly Edge Phone Assembly with Video
How to put together and connect the Poly Edge E Series desk phone
The steps below include a link to a video, which will show how to put together the Poly Edge E series phone:
- Unbox the parts.
- Assemble the parts:
- Plug in the handset, bottom right port on the back of the phone. The long flat part goes through the cable channel on the back of the phone.
- Plug in the internet cable that connects to the wall jack, top left port on the back of the phone.
- Connect the phone stand, make sure fully snapped into place.
- Connect your computer to the phone.
- Plug in the internet cable that is connected to your computer, top right port on the back of the phone.
- Plug the phone's free internet cable into the wall jack.
- Make sure the phone is plugged into an active jack.
Video demonstrating how to assemble the phone
NOTE: Make sure to plug the phone into an active wall jack after putting it together. If the phone does not turn on, try a different port.
Poly Edge desk phone assembly (video, 2:39 mins)